XL Vented 4-Blade Broadhead — 100 Grain (3 Broadheads Per Pack)
Flies like your field points. Precision engineered to break bone.
Most broadheads force a tradeoff — a large cut or reliable penetration.
Tooth of the Arrow XL Vented gives you both.
-
Flies true — no tuning headaches
-
One-piece steel — no failure points
-
Designed for pass-through penetration and heavy blood trails
Machined in the USA from heat-treated high-carbon steel, the vented ferrule stabilizes flight while reducing wind resistance — giving you accuracy without sacrificing impact performance.
Field-point flight. XL bite.
-
Flies true even at longer distances
-
Breaks bone without failing
-
Built for pass-through penetration
-
Resharpen and reuse — season after season
Built to perform when it matters — or we’ll make it right.
Our Recommendation:
Best for bowhunters who want a large cut without sacrificing accuracy or penetration. Ideal for deer, bear, and similar game.
Tech Specs — XL Vented 4-Blade Fixed Broadhead
Grain Weight: 100 grain, 125 grain
Cutting Diameter: 1 3/16” (1.1875”)
Blade Count: 4
Blade Thickness: 0.040”
Blade Material: Heat-treated high-carbon steel
Ferrule Material: Heat-treated high-carbon steel
Tip Style: Tanto
Deployment: N/A (fixed blade)
Blades Replaceable: No — one-piece machined design
Blade Angle: 22.5° per side (45° total)
Made In: USA
Pack Size: 3 broadheads
Engineered for a large wound channel with minimal planing, and heat-treated for repeatable toughness.
Features
XL Cut, Field-Point Flight — Vented ferrule reduces drag and stabilizes the head so it flies like a field point while delivering a 1 3/16” cutting diameter on impact.
Vented Ferrule for Stability — Precision venting trims weight forward or aft (depending on your build) to reduce planing and improve in-flight stability at varying speeds.
One-Piece Machined Strength — Machined from a single bar and heat-treated for impact resistance — no seams, no weak spots.
4-Blade Cut-on-Contact — Square wound channel increases blood loss and tracking ease, especially valuable on larger game.
Razor-Ground Edge — 22.5° per side for a 45° total edge that balances bite and edge retention; resharpens easily in the field.
Tanto Tip Penetration — Reinforced point geometry designed to punch through hide, muscle, and bone without deformation.
Silent, Fixed-Blade Reliability — No moving parts, no rubber bands, no deployment failure — just consistent performance.
Beginner-Friendly Flight — Tuned to fly well even for shooters who are newer to broadheads, while still giving advanced archers the big-game performance they need.
Proudly Made in the USA — Fully machined, heat-treated, and packaged stateside.
FAQ
Q: Is this head only for experienced shooters?
A: No. While optimized for accuracy and a large cutting diameter, the vented XL is built to fly like a field point and is suitable for all archers — beginner to advanced — provided you use properly spined arrows and decent form.
Q: Will this fly like a field point?
A: Yes — the vented ferrule and compact profile reduce planing. When your bow is tuned and arrows are matched, expect field-point-level flight.
Q: What grain options are available for the XL vented?
A: 100 gr, and 125 gr.
Q: Are the blades replaceable?
A: No. This is a one-piece machined broadhead; blades are integral to the ferrule.
Q: What comes in each pack?
A: Each pack includes 3 broadheads.
Q: Is this suitable for deer and bear?
A: Yes. The large cutting diameter plus strong tanto tip make it an excellent choice for deer, hogs, and larger game like bear — use good shot placement and an appropriate arrow setup.
Q: Do I need a minimum draw weight or arrow speed?
A: There’s no strict minimum, but performance is best when arrows are spine-matched and your form is consistent. For very high arrow speeds you might consider heavier arrow builds to preserve spine stability.
Q: Why choose a vented head over solid?
A: Vented ferrules reduce unnecessary mass and improve aerodynamic stability, which helps reduce planing at various speeds while keeping the large cutting diameter and penetration performance.
Q: Is this made in the USA?
A: Yes — machined, heat-treated, and packaged in the USA.
