TOTA | 150 grain XL broadhead | 1-3/16-inch solid | fixed blade

150-Grain XL Solid Broadhead – 3 Broadheads Per Pack

One goal: Complete devastation.

This 4-blade fixed-blade broadhead is built for field-point accuracy, bone-crushing durability, and straight-up lethal performance — only bigger.

Machined in the USA from a single billet of heat-treated high-carbon steel, the XL solid delivers a massive cutting diameter with the same dead-straight flight you expect from our 1-inch heads. Razor sharp out of the box. Ready to hunt. No tuning theatrics, no nonsense.

Field-point accuracy, but with a bigger bite.

Durable, single-piece construction — no weak spots.

Easy to resharpen, built to gut-pile trophies.

Satisfaction Guaranteed — No Ifs, Ands, or Buts.

Our Recommendation: Ideal for medium to advanced bowhunters who want a large cut with quiet fixed-blade reliability for bigger game.

Recommended for: advanced compound shooters with excellent form, seeking a large cut, silent fixed-blade broadhead for deer and bear sized game.

Tech Specs – XL Solid 4-Blade Fixed Broadhead

Grain Weights: 100 gr, 125 gr, 150 gr, 175 gr

Cutting Diameter: 1 3/16” (1.1875”)

Blade Count: 4

Blade Thickness: 0.040”

Blade Material: Heat-treated high-carbon steel

Ferrule Material: Heat-treated high-carbon steel

Tip Style: Tanto

Deployment: N/A (fixed blade)

Blades Replaceable: No — one-piece construction

Blade Angle: 22.5° per side (45° total)

Made In: USA

Pack Size: 3 broadheads

Built for hunters who want a bigger wound channel without sacrificing accuracy. Spin-tested for flight, heat-treated for toughness, and ground to a razor edge for instant penetration.

Features

Big-Cut, Field-Point Flight — The XL’s compact profile and refined aerodynamics fly like a field point when your bow and arrows are dialed, but they deliver a significantly larger cutting diameter at impact.

One-Piece Machined Construction — Machined from a single bar of high-carbon steel and heat-treated for maximum impact resistance. No joints, no failure points.

4-Blade Cut-on-Contact — Creates a near-square wound channel for faster blood loss and easier trailing — especially important on larger game like bear and elk.

Razor Sharp, Balanced Edge — Each blade is ground to 22.5° per side (45° total) for a balance of bite and edge retention; easy to resharpen in the field or at home.

Tanto Tip for Penetration — Reinforced point geometry that punches through hide, muscle, and bone without folding.

No Moving Parts — Fixed-blade reliability; zero deployment worries, zero rubber bands, 100% mechanical simplicity.

Multiple Grain Options — Tuned to match a wide range of bow setups, from traditional to high-speed compounds.

Proudly Made in the USA — Fully machined, heat-treated, and packaged stateside.

FAQ

Q: Are the blades replaceable?

A: No. The XL Solid is a one-piece machined broadhead — blades are integral to the ferrule and are not removable.

Q: Will these fly like my field points?

A: Yes — when your bow is properly tuned and arrows are spined correctly. The compact ferrule profile reduces planing and the heads are spin-tested for consistent flight. Expect field-point-like accuracy with a larger cut at impact.

Q: What grain weights are available?

A: 100 gr, 125 gr, 150 gr, and 175 gr.

Q: What comes in each pack?

A: Each pack contains 3 broadheads.

Q: Is the XL solid suitable for whitetail and similar game?

A: Absolutely. It’s ideal for whitetail, mule deer, and hogs — and the larger cutting diameter and robust tip make it a strong choice for larger game like elk and bear, provided you use appropriate arrow setups and shot selection.

Q: Do I need a certain draw weight or arrow speed?

A: There’s no hard minimum, but these are intended for advanced shooters who tune their setups. They perform best when arrows are properly spine-matched to your bow and your form is consistent. For very high arrow speeds consider heavier grains to maintain spine stability.

Q: Why choose 4-blade over 2-blade?

A: The 4-blade geometry creates a wider, more square wound channel which increases blood loss and tracking while still offering excellent penetration and pass-through potential on heavier game.

Q: Are these made in the USA?

A: Yes. Machined, heat-treated, and packaged in the USA.